Changing the Copy Ratio (Copy Ratio)
1-81
5
Enter the copy ratio; then press [OK].
Enter the copy ratio using the number keys on the touch panel display.
You can change the entered values with [-] or [+].
The display returns to the Basic Features screen, and the specified copy ratio is
displayed.
If you specify a value that is not within the acceptable range, a message telling
you to enter a value within the appropriate range is displayed.
NOTE
.
•
If you make a mistake when entering values, press [C], then enter the correct
value.
6
Press
(Start).
Copying starts.
NOTE
.
•
If you press (Stop) while copying is in progress to cancel the Copy job, pressing
(Start) after that will resume copying from the first sheet of the divided image.
•
To restore the copy ratio to 100%, press [Direct].
•
To cancel the setting, press [Copy Ratio]
➔
[Other Zoom]
➔
[Multi-P Enlar]
➔
[Cancel].
•
To restore the copier’s settings to the standard copy settings, press
(Reset).
Specifying the Enlargement by Entering the Copy Ratio (XY ZOOM)
Specify the vertical and horizontal copy ratios independently in %.
.
1
Place the original; then press [Copy Ratio]
➔
[Other Zoom]
➔
[Multi-P Enlar]
➔
[Copy Ratio(s)]
➔
[Next].
Refer to steps 1 through 4 of “Specifying the Enlargement by Entering the
Copy Ratio (ZOOM)” for details on this part of the procedure. (See p. 1-79.)
Basic Cop
ying
1
Summary of Contents for CS120
