Oce CS230 Phase 3 User Manual Download

Page: 603 / 686

Utility

CS230 (Phase 3)

13-63

Check that the distance from the starting print position of the test
pattern to the edge of the paper (a) is 4.2 mm.

–

If the distance is less than 4 mm, touch [+] to increase the
adjustment (between 0.2 mm and 3.0 mm).

–

If the distance is more than 7 mm, touch [–] to reduce the
adjustment (between –0.2 mm and –3.0 mm).

–

To scroll through the values quickly, touch [+] or [–] continuously.

Press the [Start] key.

The adjusted test pattern is printed.

Check the distance from the starting print position of the test pattern
to the edge of the paper.

–

Check that the width has been adjusted to 4.2 mm.

–

If more adjustment is necessary, repeat steps 8 and 9.

–

To adjust the print position for a different type of paper, return to
step 6.

Touch [OK].

–

To cancel changes to the settings, touch [Cancel].

The print position is adjusted.

a: 4.2 mm

Summary of Contents for CS230 Phase 3















































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CS230 Phase 3

Reviews:

Related manuals for CS230 Phase 3

Brands by name

Popular brands

Oce CS230 Phase 3, User Manual

Search results

Summary of Contents for CS230 Phase 3

Reviews:

Related manuals for CS230 Phase 3

Brands by name

Popular brands