20
Océ CS40xx Installation Manual
Power supply connection
The Océ CS40xx scanners use a grounded 3-prong power cord to connect to a
grounded power outlet with a maximum 16-ampere protection.
Your electrical installation must comply with IEC 364 standards and the
national standards of your country.
▼
To connect the scanner to the power supply
1
Locate the power connector at the back of your scanner.
2
Plug one end of the power cord delivered with the scanner into the connector.
3
Plug the other end of the cord into the electrical outlet.
4
Turn the
ON/OFF
switch to
ON
.
The warm-up indicator on the scanner control panel lights up and remains lit
while the scanner performs various internal diagnostic tests. When fully
powered on, the Power-on indicator stays lit continuously.
