48
Océ CS40xx Installation Manual
Ventilation and location
■
Do not block the ventilation openings of the machine.
■
Make sure that the machine is placed on a level, horizontal surface which is
strong enough to bear the full weight of the machine. See the Océ CS40xx
scanners safety data sheet in this appendix for information about the weight
of the machine.
■
Make sure that there is sufficient space around the machine. This facilitates
both proper loading of materials and equipment maintenance.
■
Do not place the machine in a room which is subject to excessive vibration.
■
Do not place the machine in a room that is too small and insufficiently
ventilated. See the Océ CS40xx scanners safety data sheet in this appendix
for information about space and ventilation requirements.
■
Take care that the machine is placed in rooms according to the environment
conditions as mentioned in the Safety Data Sheet.
General
■
Always use materials recommended by Océ and developed for this Océ
machine. Materials not approved by Océ may cause damage to your
machine.
■
Do not use the machine if it is making unusual sounds. Remove the plug from
the power outlet or turn off the switch in the fixed connection to the electrical
system and contact Service.
