Cutting method and paper size
#
Size of cover
Size of body
pages / slip sheets
Size of finished
booklet
*1
Cutting method
Length:
L2
Width:
W2
Length:
L1
Width:
W1
Length:
L
Width:
W
*2
364.0 to
L1 x 2 +
30.5 mm
(14.34"
to
L1x2+1.2")
*4
W +
top/bot-
tom cut-
ting
range
(C1)
L +
foredge
cutting
range
(C2)
W +
top/bot-
tom cut-
ting
range
(C1)
*3
138 to
216
mm
(5.44"
to 8.5")
203 to
297
mm (8"
to
11.69")
3-direction cut-
ting (top, bottom,
foredge cutting)
364.0 to
L1 x 2 +
30.5 mm
(14.34"
to
L1x2+1.2")
*4
W mm
(in.)
L +
foredge
cutting
range
(C2)
W mm
(in.)
138 to
216
mm
(5.44"
to 8.5")
257
[B5] to
297
mm
(10.12"
to
11.69")
1-direction cut-
ting (foredge cut-
ting)
364.0 to
L1 x 2 +
30.5 mm
(14.34"
to
L1x2+1.2")
*4
W mm
(in.)
L mm
(in.)
W mm
(in.)
182
[B5] to
216
mm
(7.17"
to 8.5")
257
[B5] to
297
mm
(10.12"
to
11.69")
No cutting
*1
You can also adjust the width (W) in the range of ± 1 mm (± 0.04"), and length (L) in
the range of ± 0.5 mm (0.02") by finishing size fine adjustment.
*2
If the length (L) defined as 1, be sure to set the ration of the width (W) between 1.25
and 1.5.
*3
Be sure to make the width of W1 (width of body pages / slip sheets) less than the width
of W2 (width of cover), when 3-direction cutting is done.
*4
For good looking finished booklets, the maximum length of cover you can set is 487.7
mm (19.2"). 487.7 mm (19.2") includes the total of the following values.
Length of body pages / slip sheets x 2, maximum booklet thickness (25 mm [1"]), and
maximum value of cover image placement adjustment (5 mm [0.2"]).
Chapter 4 - Basic operations
33
Finished sizes of booklets
Summary of Contents for Perfect Binder-C1
