5.5 Setting the external paper feed lever
120
A29246-X20-X-4-7680 / fa503.fm
5.5 Setting the external paper feed lever
The optimum position of the external feed lever can only be determined during printing. The
deflection of the swing in the printing system indicates whether and how far the lever needs
to be turned to the left. The farther the swing is deflected, the farther the lever must be
turned to the left. The position of the lever is optimal when the swing is deflected at an angle
of 10
o
to 20
o
during printing.
In general, the following applies: For heavy papers, the lever must be turned farther to the
left than for light papers.
The following diagrams illustrate the relationship between the deflection of the swing and
the position of the lever:
Swing deflection
Lever position
The swing is deflected more than 20
o
.
The external paper feed lever must be
turned farther to the left.
Always only adjust the lever by one stage
(= 10
o
) and then observe the deflection of
the swing. You may need to continue
turning the lever in stages until the swing is
deflected at an angle of 10
o
to 20
o
.
The swing is deflected by 10
o
to 20
o
.
The external paper feed lever is now
optimally positioned.
⇔
> 20
o
OK
10
o
– 20
o
Summary of Contents for VarioStream 7000 SINGLE
