Step #2
continued
#3:
Stand up the assembly and
using a rubber mallet tap the
Platform down until seated on the
lugs on the Side Rails. IT MAY
REQUIRE SEVERAL HARD
BLOWS WITH A RUBBER MALLET
TO SEAT THE PLATFORM ALL
THE WAY DOWN ONTO LUGS.
Step #3
#1:
Using the rubber mallet, tap
the Mounting Blocks onto the
Mounting Block Rails.
#2:
Lying the ladder assembly on
its side, slide the Mounting Block
assemblies up into the open end
of the Return Handrails as shown.
Ladder is now ready to attach to
your pool deck.
Step #4
Attaching In-Pool Ladder to Your Pool Deck
CHOOSE A LOCATION THAT
IS LEVEL AND IN FULL
VIEW. POOL MUST HAVE
COMPETENT ADULT
SUPERVISION AT ALL
TIMES WHEN IN USE.
#1:
Carefully lift the ladder into the
pool. Allow ladder to fill with water
so it settles on the bottom of the
pool. Small holes in the side rails
will let the water in. This may take a
few minutes. Make sure the bottom
tread of the ladder sits firmly on the
bottom of the pool.
OCEAN BLUE WATER
PRODUCTS WARRANTY
Ocean Blue Water Products warrants
their swimming pool ladders to be free
from defects in workmanship for one
year from date of purchase
.
DO NOT RETURN DEFECTIVE
PART TO DEALER
The defective part should be
returned, postpaid, to:
Ocean Blue Water Products
7447A S Central Ave
Bedford Park IL 60638
Enclose proof of purchase (receipts,
etc.) showing date purchased, your
name, address, and daytime phone
number. You will be notified of cost to
replace part.
This warranty gives you
specific legal rights, and you may also
have other rights which may vary from
state to state.
#2:
Position the ladder over the
pool deck with the Mounting Blocks
sitting flat. Attach the Mounting
Blocks to the pool deck using four
#10 x 3/4” self-tapping screws
in
each mounting block.
#3:
Making sure the Platform is
level, attach both mounting block
assemblies to the ladder using four
#10 x 3/4” self-tapping screws
in
each assembly.
