Sleep
You can set the timer to turn the radio off after certain period of time. The radio will turn into
Standby automatically when the time is due. There are different timer options available. If you
wish to cancel the sleep timer function, select
“Off”
in the timer option.
Factory reset
You can reset the radio to the factory default any time. Once a reset has been done, all
previous settings and preset will be erased and the radio will resume to the menu for mode
selection.
Information
To view the firmware version.
Language
There are five languages available for the menu, English/French/Deutsch/Italian/Norwegian.
Main Menu of FM mode
While the radio is in FM mode, press and hold the
<Info/Menu>
button to enter the main menu.
Most of the menu are same as DAB mode, with the additional options as follow:
Scan setting
You can choose to scan
“Strong station only”
.
Audio setting
You can set
“Mono only”
. For weak stations, mono reception is recommended as it produces
less noise.
Aux-In mode
You can listen to the music stored in other devices or smart phone by using the radio's
speaker, through the connection to the 3.5 mm aux-in jack on the rear side of the radio.
Press and hold the
< /mode>
button, choose the radio mode to
“Aux in”
. Use an audio
cable with both ends in 3.5 mm pin, one end connect to the aux-in jack on the radio, the other
end to the earphone jack on the audio device or if it has line out socket. Play the music from
the device.
Bluetooth mode
1. The radio can receive and play music from a paired Bluetooth device.
2. Switch your Bluetooth device to a pairing mode and look up the device named
“DB-330”
from the list. Select it to start pairing.
3. If the connection is successful, it will show
“Connected”
on your Bluetooth device.
4. You can start playing music from your Bluetooth device and playback now takes place using
the radio.
- 6 -
