Precautions
• The radio should not be used in a high temperature or high humidity environment over
prolonged periods of time as this may damage the unit.
• Keep the radio away from liquids as it may get damaged. Please switch off the radio
immediately if water or liquids is spilled into the radio. Consult with the shop you bought this
radio for any question.
• Avoid using or storing the unit in dusty or sandy environment.
• Do not open and repair the radio by yourself.
• Use only the specified power input voltage to power the radio. Connecting a power supply with a
different rating will cause permanent damage to the radio and may be hazardous.
• Clean only with dry cloth
Switching the radio on
Take out the power adaptor supplied in the box, insert the pin of the adaptor to the DC IN Jack at
the back of the radio, connect the plug of the power adaptor to the wall socket.
Caution: Use only the mains adaptor supplied with the radio. Connecting a power supply with a
different rating will cause permanent damage to the radio and may be hazardous.
Press the [ ] button to power on and off.
Mode
When the radio is power on, press the
[Mode]
button to select the mode among DAB, FM and
Auxiliary Input.
1. DAB Station
The first time you power on the radio, it will scan the DAB radio stations automatically. It will
display and play the first station after the scan is done.
Press the
[MENU]
and rotate
[TUNE/SELECT]
to select <Full scan><Manual tune>
<DRC><Prune> <System>
2. FM Station
Press Mode button to switch to FM mode. Then turn the
[TUNE/SELECT]
to choose other radio
channels, or long press the
[TUNE/SELECT]
to do auto scan.
Press the
[MENU]
and rotate
[TUNE/SELECT]
to select <Scan setting><Audio
setting><System>
3. Auxiliary Input
You can enjoy music from other audio devices by connecting the audio cable to the AUX IN
connector at the rear side of the unit, the other end of audio cable to the earphone jack of the
mobile phone, MP3 player, etc.
- 02 -
