Ocean Digital DB-825C, User Manual

- 

7

 -

Backlight

There are 3 brightness levels you can choose: High, Medium & Low.
1. Timeout: This option is used to set the period of time that you wish your display’s backlight 
to remain lit when your radio is just playing without any operation is made. 
The available options are: On /10sec /20sec /30sec /45sec /60sec /90sec /120 sec /180 sec. 
Select “On” will force your radio’s backlight to remain on constantly. If you select a specific 
time interval, after the selected time period has lapsed the display will dim down.
2. Level: This option will determine how bright the display’s backlight is lit while the radio is in 
operation of the functions. Whenever the radio is powered up from Standby, the backlight will 
adjust to the brightest level.  

Backlight in Standby mode
The backlight will dim to the lowest level automatically in Standby. If you want to set the 
dimmer level in Standby, you have to choose “On” under the “Timeout” menu first. In Standby, 
press the up/down button to choose the level you desire.  

Time/Date

There are 3 settings:
1. Set Time/Date: This allows the user to manually set the current Time and Date.
2. Set Format: This option will change the format of your clock to either 12 hour or 24 hour 
format.
3. Auto Update: This function will set the radio’s time and date automatically with data sent 
along with the broadcast of either the FM or DAB radio station. You can choose “No Update” 
then the radio will not receive the time data.

Note:
The FM auto Time/Date update may not work in your area, so the DAB auto update option 
is recommended.
The DAB auto update is set by default.

Alarm

There are two alarms can be set in the radio, please refer to the above Alarm section.

Sleep

This is the sleep timer function. The radio will turn in Standby itself when the time is due.
Press the 

<Sleep/Alarm/Snooze>

 button once while the radio is playing. 

Use the up/down button to select the timer as you desire and press 

<OK/Tune>

 to confirm.

After the sleep timer is activated, you can check how much time left by pressing the 

<Sleep/Alarm/Snooze>

 once. 

If you wish to cancel the sleep timer function, you have to enter into the main menu by long 
pressing the 

<Info / 

t

 / Menu>

 and select the Sleep function.  Then choose “Off” and press 

<OK/Tune>

 to confirm. 

Factory reset

You can reset the radio to the factory default any time.  Once a reset is done, all previous 
settings and preset will be erased and the radio will resume to the menu for mode selection. 

Information

Press to see the firmware version.

Language

There are six languages available for the menu, English, Dutch, French, German, Italian and 
Norwegian.
The radio is default in

English.