Ocean Digital WR-10, User Manual

- 09 -

5. Media Centre

The device supports UPnP and is DLNA-compatible.
This provides the opportunity to stream music from your network. However, this requires you 
to have a compatible device in your network that can function as a server. This can be e.g., a 
network hard drive or a conventional PC with e.g., Windows 8 via which access to the shared
folder or media sharing is permitted. The folders can then be browsed and played on the 
Tuner. 

Note - Please make sure your computer laptop is on the same Wi-Fi network as the Radio 
before you start using this function.

Music streaming

• Once the UPnP/DLNA compatible server is configure to share media files with your radio, you 

can start music streaming.

• On the main menu, select 

Media Centre

 and choose 

UPnP

.

• It may take a few seconds for the radio to complete the scan for available UPnP servers. If no 

UPnP servers are found, it will show 

Empty List

.

• After a successful scan is done, select your UPnP server.
• The radio will show the media categories available from the UPnP server, e.g. 'Music', 

'Playlists' etc.

• Choose the media files that you wish to play.
You can set the mode of playback under 

Configuration > Playback setup

.

My Playlist

You can make your own playlist for the UPnP music files. Choose and highlight the song you 
want to add to playlist, press and hold the

 [Tune/Select] 

knob or press and hold the 

[OK] 

button on remote, until the sign       appears. The song will be added to 

My playlist

.

Clear My Playlist

Remove all songs in "My Playlist" to allow a new playlist to be prepared.

Note - If you have DLNA compatible servers available, follow the steps described above to
browse the audio files from DLNA compatible device on the Tuner to play.

6. DAB+/DAB Radio(Digital Audio Broadcasting)

If there is Digital Audio Broadcasting (DAB) in your area, the Tuner can pick up the DAB 
stations as well (no internet connection is required). The Tuner supports both DAB and DAB+.

Connect the wire antenna (supplied in the box) to the antenna jack on the rear cabinet. Place 
the Tuner close to the window and extend the antenna as far as it can go to get the best 
reception.

On the main menu, scroll to 

DAB Radio

 or use the 

[Mode]

 button on remote to switch to DAB 

Radio. Press 

[OK] 

to start.

It will ask whether you want to 

Scan DAB Station

. Press 

OK

 to start scanning and it will show 

the progress on the number of channels received. When it is done, a preset page will be 
displayed for your action.