Ocean Digital WR-233, User Manual

Trouble Shooting

16

Equalizer

Select your prefer music effect. 

Resume When Power On

This is set to ON or OFF of “ Resume When Power On”.

Software update

1

）

Upgrade information will pop up on the display when there is upgrade version on the server.

2

）

When there is upgrade version available on the server, you can do the manual upgrade from 

the update menu.

Reset to default

You can do this factory reset to empty all of the settings and it comes back to default settings.
**Please note all the Station presets, Settings and configuration will be lost after you have 
performed the “Factory Reset”. 

Remark

：

Playing stopped when it comes back to default settings and skip into Language 

Setting automatically, after that it will turn to the internet setting.

1. If you have trouble connecting the radio to your wireless network, these steps may help to  
    resolve the problem:
    - Confirm that a Wi-Fi or Ethernet Wired connected PC can access the internet (i.e. can 
      browse the web) using the same network.
    - Check that a DHCP server is available, or that you have configured a static IP address on 
      the radio.
    - Check that you firewall is not blocking any outgoing ports.
    - Some access points may be set so that only equipment with registered MAC addresses can  
      connect to them. This is one possible cause of the Internet Radio being unable to connect  
      to the Wi-Fi network, and the Internet Radio display will show Bad ESSID or key. To 
      overcome this problem you will need to add the Internet Radio's MAC address to the list of 
      allowed equipment in your access point. The Internet Radio's MAC address can be found 
      using the menu <Information Center ->System Information -> Wireless Info  MAC  
      address>. You will need to refer to the guide for you Access Point in order to enter the 
      Internet Radio as an allowed piece of equipment.
    - If you have an encrypted network, check that you have entered the correct key or 
      passphrase into the radio. Remember that text-format keys are case sensitive.
    - If your wireless network name(ESSID) is 'Hidden'(a setting on the wireless access point), 
      then you can either turn on the name, or you can manually enter the name into the internet  
      radio and media player, Select  <Configure -> Network -> Manual Configuration-> Wireless          
    - > Enter ESSID>. Confirm if the Network is encrypted, e.g. requires a WEP or WPA key,then  
      enter the network name.