- 12 -
1) Press the Menu button to go to the mode selection
options
2) Select Configuration
3) Select Network
There are two different options to connect to the
network from the Configuration mode:
1) Repeat steps 1) through 5) above.
2) Select Add AP (WPS button) – Press WPS button on
your router within 2 minutes to complete the
connection.
Connection status is displayed in the top left hand
corner of the LCD with the Wi-Fi symbol and signal
strength bars ( ).
For best Wi-Fi performance, limit “drop outs”
(interruptions) the Wi-Fi Channels must be set
according to the location of the Radio e.g. China, USA,
Europe. The factory default is China.
To set the correct location, select
Configuration>Network>Wi-Fi Channels and select the
correct option.
Watch the setup demo by scanning the QR code
below:
Network Setup
