Operation Controls and Functions:
2
4
13
14
3
1
6
5
Transmitter:
7
8
9
10
11
12
15
16
17
18
19
20
21
22
Power LED Indicator
- Red light indicates that the TX is powered on
Link LED
-
Light on:
TX and RX are in good connection status.
Light Flashing
: TX and RX are in low power mode.
Light Off
: TX and RX
are not connected.
Video LED
-
Light on:
The video is encrypted.
Light flashing
: the video is not encrypted.
Light Off:
no HDMI input.
ARC LED
-
Light on:
The device is switched to the ARC mode.
Light off:
the device is switched to the SPDIF mode.
SPDIF LED
-
Light on
: The device is switch to SPDIF mode.
Light off
: the device is switched to ARC mode.
Select Button
- Used for switching the ARC mode and the SPDIF mode.
L/R IN/OUT Switch
- Switch to the left (loopout), the HDMI out port is the loopout port for the HDMI in port.
Loopout/Audio Only Switch
- Switch to the left (loopout), the HDMI out port is the loopout port for the HDMI in port; switch to the right
(audio only) the HDMI out port outputs 720p black screen image, and the audio is from ARC or SPDIF.
Host/Device USB Switch
- Switch to the left (host), the USB host mode is enabled; switch to the right (device), the USB device is enabled.
USB Devices
- Two USB device ports. connected to UDISK, mouse or keyboard.
USB Host
- USB extension host port, connected to PC.
Service
- For factory use only.
DC 24V
- DC 24V/1A power supply input port.
LAN
- 1G network port.
HBDT Out
- 10G network port, connected to the HDBT in port of receiver with a CAT6a/7 cable. It is used for various signals pass-through.
HDMI In
- HDMI signal input port, connected to signal source device, supporting EARC/ARC amplifier.
HDMI Out
- HDMI signal loopout port. It can choose to be a loopout or audio only port through the loopout/audio only switch.
L/R/In/Out
- Audio embedding / de-embedding port. It can be used for audio embedding/de-embedding through the L/R in/out switch.
SPDIF Out
- Optical output port.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.
19.