Operating Instruction
1) Connect the HDMI input source to input port of HDMI splitter.
2) Connect the HDMI splitter output ports to the displays.
3) Power up splitter, source and displays.
Connection Diagram
Connecting and Operating
Input source
HDCP2.2 4K@60Hz
HDCP2.2 4K@24Hz
HDCP1.4 4K@24Hz
HDMI Display -
Supports HDCP 2.2
HDCP2.2 4K@60Hz
HDCP2.2 4K@24Hz
HDCP1.4 4K@24Hz
HDMI Display -
Doesn’t Support HDCP 2.2
HDCP1.4 1080p@60Hz
HDCP1.4 1080p@24Hz
HDCP1.4 4K@24Hz
EDID Introduction:
EDID Copy: When HDMI Output 4 is connected to a display, outputs 1, 2 and 3 will automatically
default to that resolution. The default resolution is 4K@60Hz.
NOTE- Always follow the lowest resolution of the connected displays, in order to ensure that
the source is displayed on all connected devices.
Mixed EDID: If the connected display supports HDCP 2.2, the unit will output 4K@60Hz. If the
connected display does not support HDCP 2.2, the unit will output 1080p.
HDR is supported in both EDID Copy and Mixed EDID modes.
Auto: Defaults at 4K@60Hz.
Summary of Contents for OMX-06HMHM0002
Page 1: ......
