1). Video Input: Switch Type C, VGA, HDMI input.
2). EDID Mode:
4K60: Default EDID 4K@60Hz
1080P: Default EDID 1080P@60Hz
HDMI: Copy HDMI out EDID for input (Copy mode)
HDBT: Copy HDBT out EDID for input (Copy mode)
3) Audio Input Mode: Click to choose input option, HDMI, Analog, Mute, (HDMI: audio of
Type C/VGA/HDMI, Analog: audio embedded/MIC in)
4) MIC: VOL control, the number “5” shows the current volume. (Please note:you can
only set the MIC VOL when choosing “Analog” for audio input)
5) Analog Output: VOL control,the number “5” shows the current volume. (Please
note:you can not set VOL when audio input is “Mute”)
6) Setting: Factory reset.
Note:
Please set the audio input mode for “Analog” first by panel/PC tool/Web GUI when
you need to use MIC in/Analog audio embedded function.
①
Mac Address: Can not modify
②
IP Address: supports modify
③
Net Mask Address: supports modifying
④
Gate Way Address: supports modifying
⑤
DHCP ON/OFF
⑥
Apply: Click to confirm modified static IP
