Operating OMX-SW8x8NT Matrix Switchers
14
7.4.2
Recalling an Input/Output Configuration
To recall an input/output configuration, do the following:
1. Press the RCL button.
The RCL button blinks.
2. Press the appropriate INPUT SELECTOR button (the INPUT SELECTOR
button # corresponding to the setup #). The memory recalls the stored data
from that reference.
7.4.3
Deleting an Input/Output Configuration
To delete an input/output configuration, do the following:
1. Press the STO and RCL buttons simultaneously.
Both the STO and RCL buttons blink.
2. Press the appropriate INPUT SELECTOR button.
This erases that specific input/output configuration from the memory, leaving
it empty and available
1
.
7.5 Resetting the Machine
To reset the machine, press INPUT buttons 1, 2 and 3 simultaneously. The
machine resets itself and a 7-segment self-test is performed automatically.
1 Storing a new configuration over a previous configuration (without deleting it first) replaces the previous configuration
Summary of Contents for OMX-SW8X8NT
Page 1: ...OMX SW8x8NT ...
