GSM CUBE³ manual rel.1.0
10
When the battery has been installed, check that the battery housing
and O-ring are clean. The O-ring must always be lubricated with a
thin layer of silicone lubricant.
(5) Holding the cap in position, position the cover and screw the two
screws in place until they are tight. Do not over-tighten the screws!
A screwdriver for GSM CUBE³ assembling/disassembling is
provided in the com unit package.
If the CUBE³ is not going to be used for a while, the battery
should be removed. The cap must be stored in the battery
compartment. This will ensure that the unit will work properly
for a longer period of time.
Summary of Contents for GSM Cube 3
Page 1: ...OWNER S MANUAL ...
Page 2: ...GSM CUBE manual rel 1 0 2 ...