7
8
Kite Manual
5. We recommended that you isolate the air in your struts. After the kite is inflated, simply
pinch clamps to seal off the struts. This can be done without removing the EVA cover.
6. Holding kite at center of leading edge rotate so that kite sits leading edge down and into
the wind. Use a weight to hold down the leading edge of the kite.
Helpful Tip:
We recommend using a bag that contains sand, fine gravel, etc for weighting the kite. This
reduces your kite’s exposure to abrasion.
7. To deflate use the deflate dump valve. Unscrew lower cap to release air. Store with both
caps screwed in place, otherwise damage to the valves can occur.
Sizes 4 - 9M
8 psi
Sizes 10 - 12M
7psi
Sizes1 4.5 - 17M
6 psi
Sizes 4 - 5M
10 psi
Sizes 6 - 10M
9 psi
Sizes 12 - 14.5M
8 psi
Size 17M
7 psi
Generic PSI rating for Dacron framed kites
Generic PSI rating for ALUULA framed kites
