EPIRB3 USER MANUAL
12
912S-03967 - 01.04
28/02/2023
5.
OPERATION
The EPIRB3 is designed for best operation while floating in water. If used in other situations
ensure that the EPIRB3 is placed in the open, clear of any cover and kept upright. Do not
place the EPIRB3 close to large structures or under cover.
In the event of the vessel starting to sink the EPIRB3 MUST be released from the bracket
and placed in the water. It will activate on contact with the water.
In the case of abandoning ship, if possible, recover the EPIRB3 and tie to the survival craft
or person using the lanyard. For optimum operation, it is recommended that the EPIRB3 be
tied to the life-raft with the lanyard and floated in the sea.
!
The EPIRB3 is prevented from activation while mounted in the Manual Mounting
Bracket. For activation the EPIRB3 MUST be removed from the bracket.
!
The antenna MUST be FULLY extended for optimum performance.
5.1 Manual Release
5.1.1 Remove from the Manual Mounting Bracket
IN CASE OF EMERGENCY
USE ONLY IN SITUATIONS OF
GRAVE AND IMMINENT DANGER
