Ocean Technology Systems MilCom Surface Station 6000S, User Manual

O

TS MIL

CO

M

 S

URF
ACE

iii

BATTERY WARNINGS

MilCom Surface Station 6000S contains Lithium-Ion battery pack. Proper han-

dling should always be taken to ensure the battery will operate at its optimum lev

-

el. Mishandling or misuse of the battery could potentially affect the performance 

and Safety of the battery.

Caution

• 

Please read the manual before charging. 

• 

Lithium-Ion batteries have a predefined number of charge cycles, if the bat

-

teries won’t hold the charge or requires more frequent charging, the battery 

may need to be replaced.

• 

Battery contains a protection circuit to prevent damage to the battery  

during use. Care must be taken to ensure the battery is not damaged.

• 

If the battery will not take a charge (LED on the charger does not switch from 

Green to Red when connected to a unit with depleted battery) 

• 

Discontinue charging. Please contact OTS for further instructions.

• 

If the battery is not fully charged after 12.5 hours, discontinue charging. 

Please contact OTS for further instructions.

• 

Battery must be charged at a temperature range between 0°C (32°F) and 

45°C (113°F). Battery operation should be between –10°C (14°F) and 60°C 

(140°F).

• 

The battery must be stored away from children and pets.

• 

If the battery is completely drained, charging will be necessary to maintain 

the health of the battery. Do not leave a completely discharged battery in 

storage for a long period without charging. (Greater than 6 months)

DANGER 

The Milcom Surface Station 6000S uses Lithium-Ion rechargeable batteries 

which can explode or cause fire if damaged or stored incorrectly.

IF STORED INCORRECTLY OR DAMAGED

Read and follow the Battery Warnings, Cautions and Prohibitions below 

before using.

Failure to adhere to these guidelines could result in serious injury or death 

caused by fire or explosion.