Ocean TV
Ocean Series Antennas
OCEAN TV
12
www.oceantv.com.au
Equipment and cable installation
This offers a general explanation of how to install the IDU and satellite receiver properly to the
inside of vessel connecting with coaxial cable.
1.
The Coaxial cable is routed from the antenna to the IDU inside the vessel.
2. After Once deciding where to place the IDU and satellite receiver, make sure that both
units are placed in a dry and protected area.
3. The IDU and satellite receiver should be placed away from any heat source and in an area
with proper ventilation.
4. Ensure that there are at least 3cm of space around both units for ventilation and connec-
tion of cables.
Do not stack the units on top of each other.
5. The following describes the basic wiring configurations for the O45M antenna system.
■
Connect the Coaxial cable to the O37/45M antenna port on the back of the IDU
■
Connect one end of the supplied coaxial cable to the receiver port on the back of the
IDU
■
Connect the other end of the coaxial cable to the satellite receiver
