F i g 2 - 2
Fig2-1
1. Too many opened windows and/or doors in the
kitchen might cause air turbulence and thus
affecting the hood operation.( Fig 1-1)
2. Please maintain good air ventilation whenever the
range hood is being used with other appliances
burning gas or other fuel.
3. Machine shall be installed right on top of the
cooking area. (Fig1-2)
4. The range hood shall be installed horizontally to
avoid overflowing of collected oil in the imbalanced
oil collector .
5. The shor test route and the least no. of bends with
the exhaust pipe enhances efficiency.
6. The distance between the range hood and the
stove is best 70-80cm. (Fig 1-4)
7. Exhaust vent must not be discharged into a flue
which is used for exhausting fumes from
appliances burning gas or other fuels.
1. After unpacking, check the presence of warranty card,
instruction booklet and pipe adaptor.
2. Please check if there is malfunction such as motor not
moving or lamp not working before installation.
3. Adjust hangers of both sides, hang on machine onto
wooden screw (Fig2-1).
4 Make sure to install the range hood horizontally.
5. Installation of exhaust pipe : Select the nearest window to
the range hood and connect the exhaust pipe to go
through the window to the exterior.
6. Installation of exhaust pipe. (Fig 2-2)
Inser t one side of exhaust pipe to the adapter fitted on the
top vent of machine. Then, another side of pipe is fitted to
go through exhaust hole.
Note and Impor tance: All the installation has to be done by a
qualified person in accordance with
instructions mentioned in this booket.
Please always contact the depar tment
of our agent if you have any qusetions.
Fig1-1
Fig1-2
Fig1-3
Fig1-4
Keep machine in horizontal position
Too many windows and doors
would cause air convection.
70-80cm
