Component replacement and adjustment procedure
7.7
Lower element substitution
1.
Disconnect the power supply cord and remove the Oven from the cabinet.
2.
Remove the rear cover.
3.
Pull the tubular insulators and disconnect the terminals of heating element (see pic. A).
4.
Lift the insulation in order to have access to the fixing screw.
5.
Remove the screws (if present)
near the external terminals (see pic. B).
6.
Pull out the heating element and replace it, pay attention to the positioning of the element.
7.
Fix the screws, place correctly the fiber insulation (see pic. C), connect the terminals and push the tubular
insulators, the insulating bushes of the heating element must not be visible.
8.
The connections must not be loose.
9.
Reassemble the rear cover.
10.
Reinstall the Oven into the cabinet.
11.
Reconnect the power supply cord after the Oven is installed.
12.
Run the Oven and check all functions.
A
B
C
17 di 30
