Component replacement and adjustment procedure
7.16
Door Lock Switch substitution (if present)
1.
Disconnect the power supply cord and remove the Oven from the cabinet.
2.
Remove the upper cover to reach the switch.
3.
Disconnect the terminals from the switch (fig.3).
4.
Pull the switch, and remove also its holder (fig. 4).
5.
Replace with a new switch by reversing the previous steps.
6.
PAY ATTENTION TO THE WIRING SEQUENCE (see the wiring diagram)
7.
The connections must not be loose.
8.
Reinstall the Oven into the cabinet.
9.
Reconnect the power supply cord after the Oven is installed.
10.
Run all the Oven functions.
Fig. 3
Fig. 4
25 di 30
