ACCESSORIES
DISCHARGE AIR NOZZLE KIT ASSEMBLY (NK, 2NK)
The optional discharge nozzle kits are used to direct the conditioned air to a specific tar-
get area. By concentrating the airflow, the nozzles increase the air velocity towards
production lines to cool personnel or equipment. In server rooms, the nozzles can be
used to induce airflow through the rack to remove the hot air from the area of the equip-
ment.
NK-1 for model OWC12
, with (2) 4-inch diameter nozzles with an approximate
compressed length of 15 inches. The approximate extended length is 21 inches.
NK-2 for models OWC18 and OWC24
with (2) 6-inch diameter nozzles with an
approximate compressed length of 22 inches. The approximate extended length is
32 nches.
2NK-3 for model OWC36
, w ith (2) 8-inch diameter nozzles with an approximate
compressed length of 20 inches. The extended length is approximately 29 inches.
NK-3 for OWC60
, with (2) 8-inch diameter nozzles with an approximate compressed
length of 20 inches. The extended length is approximately 29 inches.
The nozzle kits come pre-assembles with the nozzles secured to a mounting plate, and
with edge guards. By removing the AQUACOOLER discharge grill, one can insert the
nozzle kit into the opening without the use of tools.
Nozzle Kits
9
