11
TRANSPORT AND STORAGE
• If possible, transport
your BC and AIR XS II Assembly (preferably dry) in a padded carrying case or
equipment bag separated from sharp items (i.e. dive knife, spear gun, etc.) that might damage or
scratch the components.
• You should also protect the AIR XS II from damage from heavy objects (i.e., dive light, regulator
assemblies, tanks, etc.).
• Prior to storing your AIR XS II, ensure that it is clean and dry.
• If you were unable to clean it prior to transport, or if it became exposed to other equipment that was
not clean prior to transport (such as a wet suit), clean it thoroughly and allow it to dry naturally.
SERVICE
WARNING: DO NOT attempt to disassemble or repair any components of the
AIR XS II, or to adjust the Regulator. Doing so could cause misoperation while
underwater resulting in serious injury or death. It will also void the warranty.
• Once each year, your complete BC/AIR XS II assembly should be inspected and serviced by an
Authorized Oceanic Dealer. More frequent service is recommended if you dive in severe conditions
or more frequently than an average diver (see Guidelines on page 13).
• In the event that any component of your Regulator assembly requires any form of repair or service,
take it to an Authorized Oceanic Dealer for professional service by a trained technician authorized
to perform Oceanic factory authorized service.
• Provide the Dealer with a copy of the original sales receipt and your copy of the warranty registra-
tion card.
• Inspection/service costs are not covered by the limited warranty.
