12
TRANSPORT AND STORAGE
• If possible, transport
your BC and AIR XS II Assembly (preferably
dry) in a padded carrying case or equipment bag separated from
sharp items (i.e. dive knife, spear gun, etc.) that might damage or
scratch the components.
• You should also protect the AIR XS II from damage from heavy ob-
jects (i.e., dive light, regulator assemblies, tanks, etc.).
• Prior to storing your AIR XS II, ensure that it is clean and dry.
• If you were unable to clean it prior to transport, or if it became ex-
posed to other equipment that was not clean prior to transport (such
as a wet suit), clean it thoroughly and allow it to dry naturally.
SERVICE
WARNING: DO NOT attempt to disassemble or repair
any components of the AIR XS II, or to adjust the
Regulator. Doing so could cause misoperation while
underwater resulting in serious injury or death. It will
also void the warranty.
• Once each year, your complete BC/AIR XS II assembly should be
inspected and serviced by an Authorized Oceanic Dealer. More
frequent service is recommended if you dive in severe conditions or
more frequently than an average diver (see Guidelines on page 13).
• In the event that any component of your Regulator assembly requires
any form of repair or service, take it to an Authorized Oceanic
Dealer for professional service by a trained technician authorized to
perform Oceanic factory authorized service.
• Provide the Dealer with a copy of the original sales receipt and
your copy of the warranty registration card.
• Inspection and service costs are not covered by the limited war-
ranty.
