28
When a set Countdown Time reaches 0:00, the Audible Alarm
will beep 10 times and the red LED warning light will flash.
Pressing and releasing the S button (< 2 seconds) will
acknowledge and silence the Alarm.
Pressing and releasing the S button (< 2 seconds) will
silence and acknowledge the Daily Alarm (if its set and it
sounds).
Pressing the L button will activate the Backlight.
Depressing and holding the M button for 2 seconds will
revert to the Local Default Watch Time screen (MAIN or
ALTERNATE TIME).
Depressing both the A and S buttons simultaneously for 2
seconds will access the SET WATCH COUNT DOWN
TIMER screen indicated by the graphics TIMR and SEt,
symbol TIME, and HOUR Set Point flashing (Fig. 19).
If no button is pressed during a period of 2 minutes, the unit
will revert to the Local Default Watch Time screen.
Depressing and holding the S button while the HOUR Set
Point is flashing will scroll through the Set Points in 1 hour
increments at a rate of 4 per second from 0: to 23: (hr).
Pressing and releasing the A button momentarily (< 2
seconds) will save the HOUR Set Point and/or advance to
SET MINUTES with the MINUTES Set Point flashing.
Fig. 19 - SET WATCH CDT
