background image

40

DIVE COMPUTER (DC) OPERATING MODES

As described on page 12, the ATOM features 3 selectable DC

Operating Modes -

  NORM - for Normal Air or Nitrox dives

  GAUG - for dives with no Nitrogen/Oxygen calculations

  FREE - for dives with no SCUBA

REMINDER:  Once a dive is made in GAUG Mode,

the ATOM is locked into that Mode for 24 hours

after the dive.

SURFACE MODE

Pressing and holding the M button for 2 seconds while the Local

Default Watch TIME screen is displayed (Main Time or Alternate

Time, whichever was selected as the Default) accesses the

selected SURFACE MODE screen (NORM, GAUG, or FREE).

If no dive has been taken within the past 24 hours, the NORM

SURF MAIN screen will appear as the default (Fig. 33).

  The GAUG and FREE SURF MAIN screens can be accessed

by subsequent 2 second presses of the M button.

  The Operating Mode selected (NORM, GAUG, or FREE)

will remain on display for 2 hours until a dive is made or

another Operating Mode is selected.

Fig. 33 - NORM SURF MAIN

( no dive made)

Summary of Contents for ATOM 2.0

















































































































































































Reviews: