45
DATAMAX SPORT BATTERY REPLACEMENT INSTRUCTIONS
Removing the Module From Its Boot
1. If the module is in a wrist boot, it will be necessary to peel the lips of the
boot downward off the gauge while applying pressure from underneath,
working it out slowly. If in a console, bend the rubber console boot back to
expose the edge of the module. If the console boot is flexible enough to
permit, you may bend it back far enough to scoop the module out with
your index finger. Otherwise, it may be necessary to insert a blunt screw-
driver until the tip rests just underneath the module. DO NOT pry the
module from the console! Slowly increase the pressure under the module
by releasing the tension on the rubber boot. The module will slide up the
screwdriver and exit the console.
2. Verify that your DataMax Sport contains user replaceable batteries by
examining the caseback to find the battery hatch (Fig. 33a).
WARNING - Older models of the DataMax Sport do not contain user
replaceable batteries, and must be returned to Oceanic for battery
service. If your DataMax Sport does not appear identical to that
shown in Fig. 33, DO NOT attempt to disassemble the unit. Doing
so may cause a dangerous malfunction, resulting in injury or death.
H
A
N
D
TIG
HTEN
0P
EN
USE
COIN ONLY
Fig. 33 – DRB battery hatch
a.
b.
Summary of Contents for DataMax Sport
