14
NOTE: Each numeric and graphic display represents a unique piece of
information. It is imperative that you understand the formats, ranges, and
values of the information represented to avoid any possible misunderstand-
ing that could result in error. The Informational Displays are described in
detail as the various operating modes they appear in are presented through-
out this manual.
AUDIBLE ALARM
LED Warning Light
A red LED Warning Light will light and a Speaker icon will appear when the Audible
Alarm emits a tone. They will turn off when the Alarm is acknowledged, and will not
activate if the Audible is Set OFF (a user setting).
When warning situations activate the Alarm, the unit will emit a continuous tone for 10
seconds, or until the situation is corrected, or it is acknowledged by the user pressing the
Left (Advance) button for 2 seconds. If acknowledged by the user and the situation cor-
rected, the Alarm will sound again upon reentry into the warning situation, or entry into
another type of warning situation.
A single short beep (which cannot be disabled) is emitted for the following -
After the Diagnostic countdown, if everything is okay.
If the unit automatically returns to Surface Mode from Simulator Mode.
Upon completion of a Hot Swap battery change with calculations saved.
Change from Delayed to Full Violation 5 minutes after the dive.
