31
ATR
O
2
N
2
ATR
O
2
N
2
TO SET - TIME (while in the Surface Mode)
Set for factory local time, the Time can be set to values be-
tween 1:00 and 12:59 (AM/PM) or 0:00 and 23:59.
Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
Press the Left (Advance) button 2 more times.
Time appears with the Hour value flashing (Fig. 26).
Press and hold the Right (Select) button to scroll through
the Hour values in increments of one hour.
Press the Left (Advance) button to accept the setting.
The Minute value flashes (Fig. 27).
Press and hold the Right (Select) button to scroll through
the Minute values in increments of one minute.
Press the Left (Advance) button to accept the setting and
advance to Set Year.
Fig. 26 - Set Hour
Fig. 27 - Set Minute
