35
10
20
30
40
50
60
0 5
ATR
O
2
N
2
TO SET - AIR TIME REMAINING BAR GRAPH ALARM
(while in the Surface Mode)
Factory set for 5 minutes, the Air Time Remaining Bar Graph
Alarm can be set to values of 0, 5, and 10 to 60 minutes in
increments of 5 minutes.
Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
Press the Left (Advance) button 9 more times.
The graphic Atr, and Alarm (speaker) and Cylinder icons
appear with the Air Time Remaining Bar Graph
value flashing (Fig. 33).
Press and release the Right (Select) button to decrease the
Alarm value in increments of 5 minutes. Or press and
hold to scroll.
Press the Left (Advance) button to accept the setting and
advance to Set Turn Pressure Alarm, or press and hold
Both buttons for 2 seconds to revert to Surface Mode.
Fig. 33 - Set Air Time Remaining
Bar Graph Alarm
