38
ATR
O
2
N
2
TO SET - DIVE TIME REMAINING ALARM
(while in the Surface Mode)
Factory set for 5 minutes, the Dive Time Remaining Alarm can
be set to values between 0:00 and 0:20 (minutes) in incre-
ments of 1 minute.
Press Both buttons simultaneously, release when SET: 2
appears (4 seconds).
Press and release the Left (Advance) button, the Units
screen appears with the set point flashing.
Press the Left (Advance) button 12 more times.
The graphic dtr, and Alarm (speaker) and Dive Mode
icons appear with the Dive Time Remaining value
flashing (Fig. 36).
Press and hold the Right (Select) button to scroll through
the Alarm values in increments of one minute.
Press the Left (Advance) button to accept the setting and
advance to Set Max PO2 Alarm, or press and hold Both
buttons for 2 seconds to revert to Surface Mode.
Fig. 36 - Set Dive Time
Remaining Alarm
