84
X
X
X
X
CARE AND CLEANING
Protect your Pro Plus 2 from shock, excessive temperatures,
chemical attack, and tampering. Protect the lens against
scratches with a transparent Instrument Lens Protector. Small
scratches will naturally disappear underwater.
Soak and rinse the Pro Plus 2 in fresh water at the end of
each day of diving, and check to ensure that the areas
around the Low Pressure (Depth) Sensor (Fig. 95a),
Download Interface Port (Fig. 95b), and Buttons are free
of debris or obstructions.
To dissolve salt crystals, use lukewarm water or a slightly
acidic white vinegar/water bath. After removal from the
bath, place the unit under gently running water and towel
dry before storing.
Transport your unit cool, dry, and protected.
INSPECTIONS AND SERVICE
Your Pro Plus 2 should be inspected annually by an
Authorized Oceanic Dealer who will perform a factory
prescribed function check and inspection for damage or
wear. To keep the 2 year limited warranty in effect, this
inspection must be completed one year after purchase (+/- 30
days). Oceanic recommends that you continue to have this
inspection performed every year to ensure it is working
properly. The costs of annual inspections are not covered
under the terms of the 2 year limited warranty.
Fig. 95 - Case Back
a
b
