EN-19
III. INSTALLATION
Climate condition
1. The position you choose for the installation of the refrigerator must
be well ventilated and have less hot air. Do not place the refrigerator
near a heat source such as stove, boiler, and avoid direct sunlight,
thus ensuring the cooling effect while saving energy consumption.
Do not place the refrigerator in a humid place to prevent the
refrigerator from rusting and losing electricity.
Note: The amount of refrigerant charged for the refrigerator is
indicated on the rating plate.
2. Heat dissipation space
Leave at least 300 mm of free space above the appliance, more than
100 mm on both sides and more than 50 mm at the back of the
refrigerator.
Dimensions in mm
W
D
H
AT
B
C
(
°
)
E
F
540
550
1440 910
1055 135
50
100
Note: Figure 1, Figure 2 only as a schematic diagram of the size of the
demand for the product space.
3. Place the refrigerator on a stable, level surface, otherwise it will
cause vibration and noise. When the refrigerator is placed on floor
coverings such as carpet, doormat, polyvinyl chloride, solid backing
plates should be applied under the refrigerator to avoid any color
change due to heat dissipation.
