EN
-2
8
Transport and start-up
When transporting this device, take it by the base and gently tilt it up to
45 ° maximum. Do not lift the appliance by the door handle. Do not
place the device in a completely horizontal position or upside down.
Push the refrigerator on the roller legs to move it.
Warning:
After transporting the refrigerator, you must wait at
least 8 hours before putting it into service.
1. Cleaning the device:
Clean all parts of the refrigerator with water and a mild detergent
solution. Rinse it thoroughly and dry it with a soft cloth.
Note:
The electrical parts of the device can only be cleaned with a dry
cloth.
2. Unpacking the device and disposal of the packing materials
• Remove all packing materials from around the device, as well
as any protective items located inside the device compartments.
• The cardboard packaging and sheets of paper are recyclable.
They must be disposed of in the collection bins provided for this
purpose.
•
Materials bearing the symbol are recyclable:
>
PE <= polyethylene; > PS <= polystyrene; > PP <= polypropylene
This means that they can be recycled by depositing them in
the appropriate collection containers.
•
The other packaging elements (adhesive, fasteners, etc.) must be
disposed of with household waste.
VI. BEFORE FIRST USE
