Oceanic OCEA32SFHD21B3, Operation Instructions Manual

English

   - 30 -

Wired Connectivity

 section for more information on 

the process.

If the TV does not function using the wired connection, 

check the modem (router). If the router does not have a 

problem, check the internet connection of your modem.

Connection is Slow

See the instruction book of your wireless modem to 

get information on the internal service area, connection 

speed, signal quality and other settings. You need to 

have a high speed connection for your modem.

Disruption during playback or slow reactions

You could try the following in such a case:
Keep at least three meters distance from microwave 

ovens, mobile telephones, bluetooth devices or any 

other WLAN compatible devices. Try changing the 

active channel on the WLAN router.

Internet Connection Not Available / 

Audio Video 

Sharing

 Not Working

If the MAC address (a unique identifier number) of your 

PC or modem has been permanently registered, it is 

possible that your TV might not connect to the internet. 

In  such  a  case,  the  MAC  address  is  authenticated 

each time when you connect to the internet. This is a 

precaution against unauthorized access. Since your 

TV has its own MAC address, your internet service 

provider cannot validate the MAC address of your TV.  

For this reason, your TV cannot connect to the internet. 

Contact  your  internet  service  provider  and  request 

information on how to connect a different device, such 

as your TV, to the internet.
It  is  also  possible  that  the  connection  may  not  be 

available due to a firewall problem. If you think this 

causes  your  problem,  contact  your  internet  service 

provider. A firewall might be the reason of a connectivity 

and discovery problem while using the TV in Audio 

Video Sharing mode or while browsing via Audio Video 

Sharing feature.

Invalid Domain 

Ensure that you have already logged on to your PC with 

an authorized username/password and also ensure 

that your domain is active, prior to sharing any files in 

your media server program on your PC. If the domain 

is invalid, this might cause problems while browsing 

files in Audio Video Sharing mode. 

Using Audio Video Sharing Network Service

Audio  Video  Sharing  feature  uses  a  standard  that 

eases the viewing process of digital electronics and 

makes  them  more  convenient  to  use  on  a  home 

network. 

This  standard  allows  you  to  view  and  play  photos, 

music and videos stored in the media server connected 

to your home network.

1. Server Software Installation

The 

Audio Video Sharing

 feature cannot be used if the 

server programme is not installed onto your PC 

or if 

the required media server software is not installed onto 

the companion device

. Prepare your PC with a proper 

server programme.

2. Connect to a Wired or Wireless Network

See the 

Wired/Wireless Connectivity 

chapters for 

detailed configuration information. 

3. Enable Audio Video Sharing

Enter the 

Settings>System>More

 menu and 

enable the 

Audio Video Sharing

 option.

4. Play Shared Files via Media Browser

Highlight  the 

Audio  Video  Sharing

  option  in  the 

Sources

 menu by using the directional buttons and 

press 

OK

. 

Available  media  server  devices  in  the 

network will be listed. Select one  and press 

OK 

to 

continue. 

The media browser will then be displayed. 

Refer to the 

Media Browser

 menu section for further 

information on file playback.
If a problem occurs with the network, switch your 

television off at the wall socket and back on again. 

Trick mode and jump are not supported with the 

Audio 

Video Sharing

 feature.

PC/HDD/Media Player or any other devices that are 

compatible should be used with a wired connection for 

higher playback quality.
Use a LAN connection for quicker file sharing between 

other devices like computers.

Note:

 There may be some PC’s which may not be able to 

utilize the 

Audio Video Sharing

 feature due to administrator 

and security settings (such as business PC’s).

Internet Browser

To use the internet browser, enter the 

Home

 menu first. 

Then  launch  the  internet  browser  application  which 

has an orange coloured logo with earth symbol on it.

In the initial screen of the browser, the thumbnails of 

the predefined (if any) links to web sites available will 

be displayed as 

Speed Dial

 options along with the 

Edit Speed Dial

 and the 

Add to Speed Dial

 options.

To navigate the web browser, use the directional 

buttons on the remote or a connected mouse. To see 

the browser options bar, move the cursor to the top of 

the page. 

History

, 

Tabs

 and 

Bookmarks

 options and 

the browser bar which contains previous/next buttons, 

the refresh button, the address/search bar, the 

Speed

Dial

 and the 

Vewd

 buttons are available.

To add a desired website to the 

Speed Dial

 list for quick 

access, move the cursor to the top of the page or press. 

The browser bar will appear. Highlight the 

Speed Dial

-   button and press the 

OK

 button. Then select 

Add 

to Speed Dial

 option and press the 

OK

 button. Fill in 

the blanks for 

Name

 and 

Address

, highlight 

OK

 and 

press the 

OK

 button to add. Whilst you are on the site