40
Gas connection (continued)
•
connection options
Gas distributed by bottle or tank (Butane /
Propane)
For the safety of the user, we recommend a
connection is rigid tube if possible, be reinforced
with a flexible corrugated hose (maximum length 2
meters)
(Fig. A).
In the case of an existing facility
where the
mounting of a rigid tube is impossible, it is always
possible to perform the connection with a hose
(maximum length 2 m) with two clamps (fig. B) one
on the connector, and another on the expander,
not to establish a sealing washer between the
connector and the elbow of the table.
You find the adapter and the sealing washer in the
cover supplied with the unit.
WARNING :
Temperatures above 30 ° C may result in overheating of the pipe. To avoid this, make sure no heating
device is nearby.
Screw the connector with a torque not exceeding 2.5 m / daN (m / Kgf).
In France, you must use a tube or a pipe bearing the stamp "NF Gaz".
