48
Clean function in the air dehumidifier
Press the
button (2) to activate the clean function of the dehumidi
fi
er. The
entire process takes approximately one hour:
1.
The dehumidi
fi
er runs at high speed and releases air for more than 30 minutes.
2.
The dehumidi
fi
er changes to low speed and continues running for about 20 minutes.
Interrupt the Clean function:
1. If you press the
button (2) again during the cleaning function, the cleaning
function is aborted and the unit resumes its original operating status.
2. Press the On/Off button (7) to cancel the clean function and place the
appliance in standby mode.
Pump Function
If you press and hold the humidity button (5) for more than 3 seconds, the
pumping function is activated/deactivated. (Connect a drain hose before activating
the pumping function.)
EN
