EN-29
FAULT DIAGNOSTIC GUIDE
1. The refrigerator does not work, the light does not work:
- The appliance is not plugged in
- The switch is in the off position.
- The bulb is burned out
2. The refrigerator is not cold enough:
- Thermostat temperature not set correctly.
- The external environment may require a higher setting.
- The door is opened too often, or the door is not completely closed.
- The door seal is not tight enough.
- There is not enough space between the appliance and the rear and side walls.
3. The refrigerator seems to be making too much noise:
- The rustling may come from the flow of the refrigerant, which is normal.
- At the end of each cycle, you may hear gurgling sounds due to the flow of refrigerant
through your appliance.
- Contraction and expansion of the interior walls may cause crackling and popping
noises.
- Unit is not level.
Remark :
Avoid placing the device in damp places. If there is too much humidity in the air, frost will
quickly form on the evaporator.
During periods of high relative humidity, condensation may form on the surface of the
refrigerator. It is not a malfunction. Clean the surface. If the refrigerator does not operate
correctly after all these checks, contact the technical service without further delay.
Keep the invoice or proof of purchase of the product to be able to use the guarantee. For
any questions during use, please contact your store.
VIII. FAULTS AND SOLUTIONS
Summary of Contents for OCEAF2D206W1
