EN-20
Basement flat
Place the refrigerator on a firm and level ground to maintain stable,
otherwise it will cause vibration and noise. When the refrigerator is
placed on floor coverings such as carpet, mat, polyvinylchloride, the
solid support plates must be applied under the refrigerator to avoid any
color change due to heat dissipation.
Tips for special needs
•
Moving the refrigerator / freezer place
Do not place your fridge / freezer near a heat source, stove, boiler
or radiator. Avoid direct sunlight in the outbuildings or sunbathing.
•
Installing sure to upgrade your fridge / freezer using leveling feet
before. If it is not level, the seal of the door of the refrigerator / freezer
will be affected, or even it may lead to a functional failure of the
refrigerator / freezer.
•
Upgrading after placing the refrigerator / freezer in position, wait for
4 hours before use to allow the refrigerant to drop.
•
Do not cover or do not cover the vents or grilles of your device.
•
When you are away for a long time:
-If the device is not used for several months, turn it off first, then
unplug it from the wall outlet.
-Remove all foods.
-Clean and dry thoroughly inside. To prevent the formation of odors
and mold, leave the door ajar: block the open or have it removed if
necessary.
-Keep the apparatus cleaned in a dry, ventilated and away from the
heat source, place the device smoothly and does not place a heavy
object on the device.
-Unit should not be accessible to the breeze.
