OPERATING INSTRUCTIONS
Step 1
Open the lid and take out the basket and add water to the reservoir.
Note: There is a maximum scale
MAX
in the reservoir. The water
should not exceed the
MAX
position. If the water exceeds the
maximum scale
MAX
, you need to open the bottom drain plug,
release the excess water, and cover with a transparent cover.
Step 2
Plug in power and press the
button to start the machine.
22
shortage in the water tank. You need to add water and press the
button to restart the machine.
.
3)
: Ice full alarm
When the ice reaches the maximum capacity of the ice storage
container, the
indicator light flashes, and the machine stops. At
this time, the ice needs to be poured out. When the ice position is
lower than the full sensor position, the machine will restart
automatically.
4)
button for 3 seconds. The product cleaning
Plug in power, press
function starts. The
light and the
indicator light stays on. The
indicator
indicator light flash alternately. The machine first
de icing once and then starts cleaning. Each cleaning work has 5
cycles (pump water - pour water), and each cycle is about 90
seconds. Do not disconnect the power supply during cleaning. After
cleaning, the machine enters the standby mode automatically.
Summary of Contents for OCEAMAG02
Page 1: ...MACHINE GLA ONS Manuel d instructions ICE MAKER Instruction manual R f OCEAMAG02...
Page 27: ......
Page 28: ......