The ice making
process was correct,
but no ice came out?
4. The compressor
has no refrigerant
5. Compressor
damaged
6. Fan motor
damaged
Call the service hotline
All indicators twinkle
simultaneously
1. The water box is
blocked by ice.
2. The motor is stuck, or
the motor falls off, or the
motor is damaged
3. Micro switch
damaged
1. Unplug the power to take out
the ice which under the ice
shovel, then plug in power again,
and press the POWER button.
After 3 minutes, the machine will
restart automatically.
2. Call the service hotline
The machine has
been working, but the
water has been
warming
Solenoid broke down
Replace the solenoid valve
When the ice is full,
the machine does not
display the ICE FULL
Icon
1.Ice full sensor
damaged
2.Sunlight interference
4. Replace the ice full sensor
5. Making ice indoor
6. Call the service hotline
1. If the power cord is damaged, it must be replaced by the
manufacturer, its service agent or a similarly qualified person in
order to avoid a hazard.
2. Fill with potable water only.
3. It is normal for the compressor and condenser surface to reach
temperatures between 70°C and 90°C during operation and
surrounding areas may be very hot.
4. Due to fast freezing, ice cubes may opaque. This is air trapped in
the water and will not affect quality or taste of ice.
5. This appliance is not intended for use by persons (including
25
Summary of Contents for OCEAMAG02
Page 1: ...MACHINE GLA ONS Manuel d instructions ICE MAKER Instruction manual R f OCEAMAG02...
Page 27: ......
Page 28: ......
