32
1.Using a flat blade screwdriver, remove the
plastic hinge cover from the top of the door.
Be careful not to scratch freezer surface.
2.Using a slotted screwdriver, unscrew the three
screws from the top hinge bracket. Remove
the bracket. Lift and remove the door from
the bottom hinge pin. Set door safely aside.
3.On the opposite side of the unit, use a thin-
bladed tool to carefully pry up and remove
the hole plug from top of door and plastic
square cover from top of cabinet. Insert plug
and cover into provided hole on opposite side
of door and into holes exposed by removal of
top hinge bracket.
4.Unscrew and remove the leveling foot from
the bottom hinge bracket. Using a slotted
screwdriver, remove the two screws attaching
the bottom hinge bracket to the cabinet.
Unscrew the foot from the other side of
cabinet.Attach bracket and feet to opposite
sides from which removed.
5.Mount the door onto the bottom bracket.
Insert top bracket hinge pin into hole in top
of door. Use the three previously removed
screws to attach back of top bracket to
cabinet.
6.Replace the plastic hinge cover over the top
hinge bracket.
7.Check that the door is aligned horizontally and vertically with the the perimeter of the cabinet opening before
CAUTION:
If the freezer has been placed in a horizontal or tilted position for ease of doing reversal, wait 24 hours
before plugging it in. Plugging in sooner may result in permanent damage to cooling system.
Summary of Contents for OCEARTT90B2
Page 1: ......
Page 12: ...NOMS DES PI CES 10 INVERSION DE LA PORTE...
Page 33: ...31 NAMES OF PARTS REVERSING THE DOOR...
Page 44: ......
