EN-
19
4. When installing your refrigerator, it is important to consider the climate
class of the product. To find out which climate class your refrigerator
belongs to, please check the nameplate: the refrigeration unit is
operating correctly in the ambient temperature range indicated on the
table, depending on the climate class.
Class
Symbol
Average ambient
temperature °C
Extended temperate
SN
from + 10 to + 32
temperate
N
from + 16 to + 32
subtropical
ST
from + 10 to + 38
tropical
T
from + 10 to + 43
5. Before connecting the unit to the power supply, let it rest for about two
hours. This will reduce the risk of malfunction in the cooling system
due to handling during transport. Operate your product about 2 to 3
hours before adding food.
CAUTION: To avoid a hazard caused by instability of the unit, it must be
installed and secured in accordance with the instructions in the
installation instructions.
6. Electrical connection
a) Check that the voltage values of the power supply can withstand
those indicated on the nameplate placed in the refrigerator. The
electrical installation must comply with the requirements of
standard NF C 15-100.
If the outlet is not equipped with a grounding plug, or if the plug is
not indicated for your network, we advise you to contact a
specialized electrician.
Do not use adapters or diverters to prevent overheating and
burning.
If the appliance is not equipped with an electrical socket, it must be
connected to the mains by means of a switch that will be connected
directly to the power supply terminals. This switch must guarantee
a unipolar disconnection of the device with contact separation of
not less than 3 mm.
