IV.INSTALLATION
1. Make sure the unit stays upright during transport. Do not tilt the appliance
more than 45 degrees when moving it. Do not exert pressure on the
condenser, the door and its handle to avoid deformation or disruption of
the operation of the refrigerator.
2. Make sure there is enough space around the refrigerator for it to work
properly. Allow about 10 centimeters of free space at the back and sides of
the unit so that air can circulate to cool the compressor. Also leave about
thirty centimeters above it. Level the appliance by acting on the adjustable
feet.
3. Place the unit away from direct sunlight and heat sources (stoves, heaters,
radiators, etc ...). Direct sunlight can damage the coating and heat sources
can increase electricity consumption. Extremely cold ambient temperatures
can also cause malfunctions. Avoid putting the device in humid places. If
there is too much moisture in the air, there will quickly be frost on the
evaporator.
EN-19
Summary of Contents for OCEARTT91S8
