b) Plug the unit into a properly installed, properly grounded, wall outlet.
Never cut or remove (for any reason) the (ground) wire of the power
cord.
Any questions regarding power or grounding should be directed to an
accredited electrician or a center authorized to work on this type of
product.
WARNING: If the grounded plug is used improperly, there may be a risk of
electric shock!
EN-22
Do not use adapters or diverters to prevent overheating and burning.
If the appliance is not equipped with an electrical socket, it must be
connected to the mains by means of a switch that will be connected
directly to the power supply terminals. This switch must guarantee a
unipolar disconnection of the device with contact separation of not less
than 3 mm.
WARNING
The socket of the installation must always be provided with a connection to the
ground. If the power supply is not connected to ground, you must not connect
the device.
WARNING: Do not put water on the refrigerator as it may cause equipment
failure or risk of electric shock.
TEMPERATURE INDICATOR
The symbol opposite indicates the location of the coldest
zone of your refrigerator: this zone is delimited at the
bottom by the window of the vegetable crisper, and at the
top by the symbol or the shelf positioned at the same
height.
Warning!
It must be possible to disconnect the device from the mains;
the plug must therefore be easily accessible after installation.
Summary of Contents for OCEARTT91S8
