Oceanic OCi Operating Manual Download

Page: 57 / 76

OCi OPERATING MANUAL

Doc. No. 12-5335-r02 (9/12/13)

SET SAMPLING RATE (TECH FREE only),

information includes (Fig. 143):

> Graphics PC SAMPLE RATE.
> Graphics ON and SET, with ON fl ashing upon access.

There is no OFF setting for this feature.

> Graphic SEC with Time (seconds).

•   A or M (< 2 sec) - to toggle between ON and SET.
•  S (2 sec) - to step back to the Set Utilities Menu without changing the setting.
•   S (< 2 sec) - to save the selection.

> If ON is selected, operation will revert to the Set Utilities Menu.
> If SET is selected, the time digits will fl ash.

•   S (2 sec) - to step back to SET fl ashing.
•   A (< 2 sec) - to step through the time set points 0.25, 0.50, 1.00, 2.00 (seconds) one at a time.
•   M (< 2 sec) - to step back through the set points one at a time.
•   S (< 2 sec) - to save the setting and fl ash the graphic SET allowing ON to be selected/saved.

SET DSD (DIVE START DEPTH),

information includes (Fig. 144):

>   Depth with FT (or M) icon.
>   Graphics DIVE START DEPTH and DSD.
>   Graphics ON and SET, with ON fl ashing upon access.

There is no OFF setting for this feature.

•   A or M (< 2 sec) - to toggle between ON and SET.
•  S (2 sec) - to step back to the Set Utilities Menu.
•   S (< 2 sec) - to save the selection.

> If ON is selected, operation will revert to the Set Utilities Menu.
> If SET is selected, the Depth digits will fl ash.

•   S (2 sec) - to step back to SET fl ashing.
•   A (< 2 sec) to step upward through the set points of 2, 4, 6 FT (0.6, 1.2, 1.8 M) one at a time.
•   M (< 2 sec) to step back through set points one at a time.
•   S (< 2 sec) - to save the setting and fl ash the graphic SET allowing ON to be selected/saved.

SET BDSI (BETWEEN DIVE SURFACE INTERVAL),

information includes (Fig. 145):

>   Graphics DIVE SURF INTVL and BDSI.
>   Time (min:sec) with SURF icon.
>   Graphics ON and SET; with ON fl ashing upon access.

•   A or M (< 2 sec) - to toggle between ON and SET.
•  S (2 sec) - to step back to the Set Utilities Menu.
•   S (< 2 sec) - to save the selection.

> If ON is selected, operation will revert to the Set Utilities Menu.
> If SET is selected, the Time digits will fl ash.

•   S (2 sec) - to step back to SET fl ashing.
•   A (hold) to scroll upward through the set points 8/sec from 0:01 to 1:00 (min:sec) in increments of :01 (1 second).
•   A (< 2 sec) to step upward through the set points one at a time.
•   M (< 2 sec) to step back through set points one at a time.
•   S (< 2 sec) - to save the setting and fl ash the graphic SET allowing ON to be selected/saved.

-----------------------------------------------------------------------------------------------------------

SELECT OP (OPERATING) MODE,

same as NORM/GAUG - refer to page 26.

OCi ID (SERIAL NUMBER),

same as NORM/GAUG - refer to page 27.

---------------------------------------------------------------------------------------------------------
---------------------------------------------------------------------------------------------------------

Upon descent to the DSD (Dive Start Depth) set for 5 seconds, operation will enter Dive Mode.

Fig. 144 - SET DSD

Fig. 145 - SET BDSI

Fig. 143 - SET SAMPLING

(TECH FREE only)